TECHNOLOGY OF OPEN-ENDED ENGINEERING IN TRAINING OF ENGINEERS
Abstract
The article presents the authors’ technology of interdisciplinary open-ended engineering. This technology is an integrated teaching method that significantly increases the practical component in the educational program. It creates conditions to overcome the shortcomings in engineering education. The basic ideas of the technology of open-ended engineering, the experience of their implementation in higher education and the authors’ vision of teaching technology are examined in the article. The paper highlights the main stages of development process of the technology of open-ended engineering to prepare students in higher school of engineering (Ural Federal University). As well as the complex of methodological tools and procedures. The presented organizational model of open-ended engineering technology integrates the functions of creation and implementation of all educational program. The authors analyze the characteristics of students’ educational activity while implementing projects according to the technology of open-ended engineering and present the intermediate results of the application of the authors’ technology in engineering education process of the undergraduate engineering students.
About the Authors
A. P. ISAEV
Ural Federal University named after the first President of Russia B.N. Yeltsin
Russian Federation
Russian Federation
Dr. Sci. (Economics), Prof., the Department «System energy management and industrial enterprises»
Address: 19, Mira str., Ekaterinburg, 620002, Russian Federation
L. V. PLOTNIKOV
Ural Federal University named after the first President of Russia B.N. Yeltsin
Russian Federation
Russian Federation
Cand. Sci. (Engineering), Assoc. Prof., the Department «Turbine and engines»
Address: 19, Mira str., Ekaterinburg, 620002, Russian Federation
N. I. FOMIN
Ural Federal University named after the first President of Russia B.N. Yeltsin
Russian Federation
Russian Federation
Senior teacher of the Department «Industrial, civil engineering and real estate expertise»
Address: 19, Mira str., Ekaterinburg, 620002, Russian Federation
References
1. Pokholkov, Yu.P., Kizeev, V.M. (2011). [The Quality of Engineering Education in Russia]. ATIP-obrazovanie [ATIP-education]. No. 3, pp. 28-30. (In Russ., abstract in Eng.)
2. Popova, I.P. (2016). [Education and Continuity of Russian Engineers: New Challenges, Old Problems]. Alma Mater (Vestnik vysshej shkoly) = High school Herald. No. 11, pp. 3-8. (In Russ., abstract in Eng.)
3. Isaev, A.P., Kozubskii, A.M., Plotnikov, L.V., Suhanov, G.G., Fomin, N.I., Furin, V.O. (2015). Professionalizm inzhenera-konstruktora: analiz, otsenka i sovershenstvovanie [Professionalism of Design Engineer: Analysis, Evaluation, and Improvement]. Ekaterinburg: Ural Federal Univ. Publ., 168 p.
4. Simon’yants, R.P. (2014). [Problems of Engineering Education and Their Solutions with the Assistance of Industry]. Nauka i obrazovanie: nauchnoe izdanie MGTU [Science and Education: Scientific Publication of Bauman MSTU]. No. 3, pp. 394-419. (In Russ., abstract in Eng.)
5. Luk’yanenko, M.V., Polezhaev, O.A., Churlyaeva, N.P. (2012)/ [Problems of Engineering Education and Prospects of Graduates’ Progress in the Workplace]. Informatika, vychislitel’naya tekhnika i inzhenernoe obrazovanie [Information, Computing and Engineering Education]. No. 1 (8), pp. 42-49. (In Russ., abstract in Eng.)
6. Tkhagapsoev, H.G., Yakhutlov, M.M. (2014). [Problems of Engineering Education in Modern Russia: Methodology of Analysis and Ways of Solving]. Vysshee obrazovanie v Rossii [Higher Education in Russia]. No. 8-9 (207), pp. 27-36. (In Russ., abstract in Eng.)
7. Rahman, N.A., Kofli, N.T., Takriff, M.S., Abdullah, S.R.S. (2011). Comparative Study between Open Ended Laboratory and Traditional Laboratory. IEEE Global Engineering Education Conference (EDUCON), рр. 108-115.
8. Avadeni, Yu.I., Vitushkin, A.N., Zhigadlo, A.P., Tsvetkova, E.V. (2014). [The Benefits and Advantages of Technology Training Through Design for Development of Professional Skills of University Graduates]. Vestnik Sibirskoi gosudarstvennoi avtomobil’no-dorozhnoi akademii [Bulletin of Siberian State Automobile and Highway Academy]. No. 3 (37), pp. 138-144. (In Russ., abstract in Eng.)
9. Vitushkin, A.N. (2005). Uchebnoe skvoznoe proektirovanie [Learning through Open-ended Design]. Omsk: Siberian State Automobile and Highway Academy Publ., 225 p.
10. Rostovtsev, A.N., Kul’gina, L.A. (2014). [Methodical Features of Realization of Technology through Course Design for Preparation of Bachelors of Building]. Tekhnologicheskoe obrazovanie i ustoichivoe razvitie regiona [Technology Education and Sustainable Development of a Region]. No. 1-2, pp. 29-35. (In Russ., abstract in Eng.)
11. Goncharov, K.O., Romanov, A.D., Kulagin, A.L., Romanova, E.A. (2014). [Introduction of Technology Open-ended Digital Design in the Research Work of Undergraduate and Postgraduate Students]. Sovremennye problemy obrazovaniya i nauki [Modern Problems of Education and Science]. No. 6, pp. 325-332. (In Russ., abstract in Eng.)
12. Ermilov, V.V. (2016). [About the Method of a Through-Course Design for Preparation of Specialists of Direction 23.05.01 “Land Transport and Technological Means”]. Vestnik Cherepovetskogo gosudarstvennogo universiteta [Bulletin of Cherepovets State University]. No. 1 (70), pp. 91-94. (In Russ., abstract in Eng.)
13. Zavalishin, Yu.K., Denisova, N.A. (2012). [Open-ended Design as a Cycle of Disciplines for Engineering Specialties: Experience of Work]. In: Sistemy proektirovaniya tehnologicheskoi podgotovki proizvodstva i upravleniya etapami zhiznennogo tsikla promyshlennogo produkta (CAD / CAM / PDM – 2012) [Design System of Technological Preparation of Production and Management Process of the Life Cycle of an Industrial Product (CAD / CAM / PDM – 2012)]. Moscow: Analitik Publ. Pp. 266- 269. (In Russ.)
14. Hamid, R., Baharom, S., Taha, M.R., Kasim, A.A.A. (2012). Sustainable and Economical Open-Ended Project for Materials Technology Course Laboratory Work. Procedia – Social and Behavioral Sciences. Vol. 60, pр. 3-7.
15. Goryachev, N.V., Yur’ev, N.K. (2011). [Experience of Application of Through-Design Systems in the Preparation of Final Qualifying Work]. Izvestiya Penzenskogo gosudarstvennogo pedagogicheskogo universiteta [Proceedings of Penza State Pedagogical University]. No. 26, pp. 534-540. (In Russ., abstract in Eng.)
16. Kisel’, N.N., Grishchenko, S.G. (2014). [End-To-End Design of Devices in the Preparation of Masters]. Metodicheskie voprosy prepodavaniya infokommunikatsii v vysshei shkole [Methodical Questions of Teaching Information and Communication in Higher School]. No. 3, pp. 108-109. (In Russ., abstract in Eng.).
17. Isaev, A.P., Plotnikov, L.V. (2016). [«Educational Engineering» in the Context of the Implementation of the CLIO Ideology]. Vysshee obrazovanie v Rossii = Higher Education in Russia. No. 12 (207), pp. 45-52. (In Russ., abstract in Eng.)
Review
Views:
538
Email this article 