Preview

Vysshee Obrazovanie v Rossii = Higher Education in Russia

Advanced search

GENERAL PROFESSIONAL COMPETENCE OF A MODERN RUSSIAN ENGINEER

Abstract

The National Presidential Council for professional competence coordinates development of new professional standards and modernization of existing ones. A task was set to prepare and update Educational Standards on the basis of revised Professional Standards. 158 Federal State Educational Standards on Engineering and Industrial Technology Sciences have been developed so far. It is suggested to use this massive data to formulate a generalized competence-based model of an engineer with a particular educational degree in a particular field of education. To develop the model a standardization of wording for all general professional competences similar for all engineering majors had to be completed. The results of the survey described in this article will be the basis for recommendations of Coordination Board in Engineering and Industrial Technology Sciences. A project of general professional competences unified for the field of education is presented in the summary of the article.

 

About the Authors

A. I. RUDSKOY
Peter the Great St. Petersburg Polytechnic University, St. Petersburg
Russian Federation
Academician of the Russian Academy of Sciences, Dr. Sci. (Engineering), Prof., Rector


A. I. BOROVKOV
Peter the Great St. Petersburg Polytechnic University, St. Petersburg
Russian Federation
Cand. Sci. (Engineering), Assoc. Prof., Vice-Rector for innovative projects


P. I. ROMANOV
Peter the Great St. Petersburg Polytechnic University, St. Petersburg
Russian Federation
Dr. Sci. (Engineering), Prof., Director of the Center for science and methodology


O. V. KOLOSOVA
Peter the Great St. Petersburg Polytechnic University, St. Petersburg
Russian Federation
Dr. Sci. (Engineering), Prof.


References

1. Aleksandrov, A.A., Rudskoy, A.I., Chubik, P.S., Borovkov, A.I., Romanov, P.I. et al. (2015). Formirovanie sistemy uchebno-metodicheskikh ob”edinenii po oblasti obrazovaniya «Inzhenernoe delo, tekhnologii i tekhnicheskie nauki» [Formation of the System of Training and Methodological Associations in the Education Field of “Engineering, Technology, and Technical Sciences”]. St. Petersburg: Publishing House of Polytechnic Univ., 125 p. (In Russ.)

2. Aleksandrov, A.A., Rudskoy, A.I., Chubik, P.S., Borovkov, A.I., Korshunov, S.V., Romanov, P.I. et al (2016). Makety primernykh osnovnykh obrazovatel’nykh programm po urovnyam vysshego obrazovaniya – bakalavriat, magistratura, spetsialitet: uchebnoe posobie [Models of the Approximate Basic Educational Programs According to the Levels of Higher Education – Undergraduate, Graduate, Specialty: textbook]. St. Petersburg: Publishing House of Polytechnic Univ., 96 p. (In Russ.)

3. Rudskoy, A.I., Borovkov, A.I., Romanov, P.I. (2017) V budushchee, sokhranyaya traditsii: Materialy Plenuma Soveta federal’nykh uchebno-metodicheskikh ob”edinenii po universitetskomu politekhnicheskomu obrazovaniyu 30 no-yabrya – 22 dekabrya 2017 g. [Into the Future, Keeping the Tradition: Plenum of the Federal Council of Educational Organizations for University Polytechnic Education 30 November – 22 December, 2017: Collection of synopsis. St. Petersburg: Publishing House of Polytechnic Univ., 108 p. (In Russ.)

4. Pilipenko, S.A., Zhidkov, A.A., Karavaeva, E.V., Serova, A.A. (2016). [On the Correlation between Federal Educational Standards of Higher Education and Professional Standards: Problems, Possible Approaches, Recommendation on Actualization]. Vysshee obrazovanie v Rossii = Higher Education in Russia. No. 6 (202), pp. 5-15. (In Russ., abstract in Eng.)

5. Shekhonin, A.A., Tarlykov, V.A., Voznesenskaya, A.O., Bakholdin, A.V. (2017). [Harmonization of Qualification in Higher Education and in the Job Market]. Vysshee obrazovanie v Rossii = Higher Education in Russia. No. 11 (217), pp. 5-11. (In Russ., abstract in Eng.)

6. Borovkov, A.I., Romanov, P.I. (2017). [On the Draft Strategy of Engineering Education Development in Russia for the Period up to 2020]. In: Conference Proceedings of State Research Institute “Natsrazvitie”. November 2017. Collection of Selected Articles. St. Petersburg, pp. 76-79. (In Russ.)

7. Rudskoy, A.I., Borovkov, A.I., Romanov, P.I., Kiseleva, K.N. (2017). Inzhenernoe obrazovanie: mirovoi opyt podgotovki intellektual’noi elity [Engineering Education: International Experience of Intellectual Elite Training. St. Petersburg: Publishing House of Polytechnic Univ. 216 p. (In Russ.)

8. Borovkov, A.I., Burdakov, S.F., Klyavin, O.I., Mel’nikova, M.P., Pal’mov, V.A., Silina, E.N. (2012). Sovremennoe inzhenernoe obrazovanie: ucheb. posobie [Modern Engineering Education: Textbook]. St. Petersburg: Publishing House of Polytechnic Univ., 80 p. (In Russ.)

9. Borovkov, A.I., Kiseleva, K.N., Romanov, P.I. (2016). [Regulatory Legal and Methodical Bases of Formation the Funds of Assessment Tools of the Basic Educational Programs of Higher Education]. Nauchnotekhnicheskie vedomosti Sankt-Peterburgskogo gosudarstvennogo politekhnicheskogo universiteta. Gumanitarnye i obshchestvennye nauki [Scientific-technical Bulletin of Saint-Petersburg State Polytechnic University. Humanities and Social Sciences. No. 2 (244), pp. 131-139. (In Russ.)

10. Rudskoy, A.I., Aleksandrov, A.A., Chubik, P.S., Borovkov, A.I., Romanov, P.I. (2017). The Development Strategy of Engineering Education in the Russian Federation for the Period Until 2020. Project. St. Petersburg: Publishing House of Polytechnic Univ. 53 p. (In Russ.)

11. Ivanov, V.G., Sazonova, Z.S., Sapunov, M.B. (2017). [Engineering Pedagogy: Facing Typology Challenges]. Vysshee obrazovanie v Rossii [Higher Education in Russia]. No. 8/9, pp. 32-42. (In Russ., abstract in Eng.)

12. 10 navykov, kotorye budut vostrebovany v 2020 godu [10 Skills That Will Be in Demand in 2020]. (2016). Insider Pro. Available at: https://ru.insider.pro/analytics/2016-01-22/10-navykov-kotorye-budut-vostrebovany-v-2020-m/ (accessed 10.01.18) (In Russ.)


Review

Views: 956


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 0869-3617 (Print)
ISSN 2072-0459 (Online)