The International Society for Engineering Pedagogy: the Achievements for 45 Years
Abstract
The paper highlights the development of the International Society for Engineering Pedagogy (IGIP) during 45 years since its establishment and its entering into the international system of societies for engineering education. The authors also analyze the reports given at recent IGIP conferences on engineering education. These reports focus on the need of changing the content of engineering education in the framework of the “Agenda for sustainable development”, as well as teaching methods in the era of “digital technologies”. For the last years the IGIP conferences are being held conjointly with the ICL (Interactive Collaborative Learning) conferences. The participants of the conferences emphasize that the teamwork should be viewed as a basis for problem-oriented learning which is used in many technical universities all over the world. The widely implemented CDIO ideology also provides for teamwork. In conclusion the authors show the role of the Russian technical universities in the development of international integration of engineering education.
About the Authors
A. N. SolovyevRussian Federation
Dr. Sci. (Pedagogy), Dean
V. M. Prikhodko
Russian Federation
Dr. Sci. (Engineering), Prof., Corr. Member of RAS
References
1. Prikhodko, V.M., Polyakova, T.Y. (2015). IGIP. Mezhdunarodnoe obshchestvo po inzhenernoi pedagogike: proshloe, nastoyashchee, budushchee [IGIP. International Society for Engineering Education: Past, Present, Future]. Moscow: Tekhpoligraftsentr Publ., 143 p. (In Russ.)
2. Prikhodko, V.M., Sazonova, Z.S. (2007). [Engineering Pedagogy: Formation, Development, Prospects]. Vysshee obrazovanie v Rossii = Higher Education in Russia. No. 6, pp. 10-25. (In Russ., abstract in Eng.)
3. Melezinek, A. (1998). Inzhenernaya pedagogika [Engineering Pedagogy]. Moscow: MADI (TU) Publ., 185 p.
4. Ivanov, V.G., Kaybiyaynen, A.A., Miftakhutdinova, L.T. (2017) [Engineering Education in Digital World]. Vysshee obrazovanie v Rossii =Higher Education in Russia. No. 12 (218), pp. 136-143. (In Russ., abstract in Eng.)
5. Hoyer, H.J., Cheng, S. (2015). [World Engineering Forum 2015 in Dubai]. Vysshee obrazovanie v Rossii = Higher Education in Russia. No. 3, pp. 33-40. (In Russ., abstract in Eng.)
6. Auer, M.E., Zafoschnig, A. (2015). The Participation of IGIP in the 2014 WEEF. Vysshee obrazovanie v Rossii = Higher Education in Russia. No. 3, pp. 40-45. (In Eng., abstract in Russ.)
7. Prikhod’ko, V.M., Solov’yev, A.N. (2015). [What the Modern Engineering Education Should Be? (Thinking of Global Forum Participants)]. Vysshee obrazovanie v Rossii = Higher Education in Russia. No. 3, pp. 45-56. (In Russ., abstract in Eng.)
8. Ivanov, V.G., Pokholkov, Yu.P., Kaybiyaynen, A.A., Ziyatdinova, Yu. N. (2015). [Developing Engineering Education for a Global Community]. Vysshee obrazovanie v Rossii = Higher Education in Russia. No. 3, pp. 67-78. (In Russ., abstract in Eng.)
9. Ruutmann, T., Lohmus, M., Sell, R., Stoun, I., Pihel, M. (2017). Self-Evaluation of Pedagogical Competencies of Academic Staff in the Context of Career Management ICL2017 – 20th International Conference on Interactive Collaborative Learning 27-29 September 2017, Budapest, Hungary, рр. 821–831.
10. Baydenko, V.I., Selezneva, N.A. (2017). [Optics of Looking to the Future (Paper 3)]. Vysshee obrazovanie v Rossii = Higher Education in Russia. No. 12 (218), pp. 120-132. (In Russ., abstract in Eng.)
11. Kazoka, A., Nordal, E. Student-centred learning and quality education: the implementation of student-centred learning in quality assurance procedures. Available at: http://eua.be/Libraries/eqaf-2014/II_3_Kazoka_Nordal_Student_centred_paper.pdf?sfvrsn=0
12. Student-Centred Learning. Toolkit for Students, Staff and Higher Education Institutions ESU. Brussels, October 2010. URL: http://www.esib.org/documents/publications/SCL_toolkit_ESU_EI.pdf
13. Sanger, Ph. A. (2017). Development of Technologies and Innovations in Modern University: International Multi-Disciplinary Student Teams Solving Real Problems for Industry. Vysshee obrazovanie v Rossii = Higher Education in Russia. No. 12 (218), pp. 49-53. (In Eng., abstract in Russ.)
14. Sanger, P.A. (2011). Integrating Project Management, Product Design with Industry Sponsored Projects Provides Stimulating Senior Capstone Experiences. International Journal on Engineering Pedagogy, vol. 1(2).
15. Rethinking Engineering Education, the CDIO Approach, Second Edition. E. Crawley, J. Malmqvist, S. Ostlund, D. Brodeur, K. Edstrom. Springer, 2014. 311 p.
16. Isaev, A.P., Plotnikov, L.V. (2016). [“Educational Engineering” in the Context of the Implementation of the CDIO Ideology]. Vysshee obrazovanie v Rossii = Higher Education in Russia. No. 12 (207), pp. 45-52. (In Russ., abstract in Eng.)
17. Chuchalin, A.I. (2013) [Applying International Engineering Alliance Standards in Design and Quality Assurance of the Higher and Intermediate Vocational Training]. Vysshee obrazovanie v Rossii = Higher Education in Russia. No. 4, pp. 12-25. (In Russ., abstract in Eng.)
18. Krushelnitskaya, O.I., Polevaya, M.V. (2017). [Dependence of the First-Year Students’ Motivation on the Chosen Area of the Training Specialty]. Vysshee obrazovanie v Rossii = Higher Education in Russia. No. 12 (218), pp. 35-45. (In Russ., abstract in Eng.)
19. Solovyev, A.N. (2017). [Pre-Engineering Programmes in Moscow (Russia) and in USA]. Avtomobil’. Doroga. Infrastruktura. [Automobile, Road, Infrastructure] No. 1(11). 16 p. Available at: http://www.adimadi. ru/madi/article/view/347/pdf_234 (In Russ., abstract in Eng.)
20. Prikhodko, V.M., Petrova, L.G., Solovyev, A.N., Makarenko, E.I. (2011). [Activity of the IGIP Russian Monitoring Committee]. Vysshee obrazovanie v Rossii = Higher Education in Russia. No. 12, pp. 39-47. (In Russ., abstract in Eng.)
21. Prikhodko, V.M., Petrova, L.G., Solov’yev, A.N., Makarenko, E.I. (2011). [Importance of the Institution of International Cooperation for Integration of the Russian Higher Technical Education in the Global Education Area]. Vestnik TvGU [Herald of Tver State University, Series “Pedagogy and Psychology”]. No. 4, pp. 141-151. (In Russ.)
22. Pokholkov Y.P., Agranovich B.A. (2012). [Approaches to the Formation of the National Doctrine of Engineering Education of Russia under Conditions of the New Industrialization: Problems, Aims, Challenges]. Inzhenernoe obrazovanie [Engineering Education]. No. 9, pp. 5-11. (In Russ.)
23. Sazonova, Z.S. 2015). [Methodological Seminar MADI-IGIP as a Form of Engineering Pedagogy Development: History and Prospects]. Vysshee obrazovanie v Rossii = Higher Education in Russia. No. 2, pp. 30-39. (In Russ., abstract in Eng.)
24. Senashenko, V.S., Verbitskiy, A.A., Ibragimov, G.I., Osipov, P.N. et al. (2017). [Engineering Pedagogy: Methodological Issues: Round Table Discussion]. Vysshee obrazovanie v Rossii = Higher Education in Russia. No. 11 (217), pp. 137-157. (In Russ., abstract in Eng.); Ivanov, V.G., Sazonova, Z.S., Sapunov, M.B. (2017). [Engineering Pedagogy: Facing Typology Challenges]. Vysshee obrazovanie v Rossii = Higher Education in Russia]. No. 8/9, pp. 32-42. (In Russ., abstract in Eng.)
25.
26.
27.
28.
29.
Email this article 